• Home
  • >>Brother Mfc-j5945dw Not Print Via Network

Brother MFC-J5945DW Not Print Via Network

The issues usually encounter that Brother MFC-J5945DW Not Print Via Network are listed below

  • Your printer status might be Offline or Paused.
  • You cannot print using the Brother printer on a wireless network. This problem might occur on both Windows and Mac computers.
  • You cannot print using the Brother printer on a wired network. This problem also holds good for both your Windows and Mac computers.
  • From the above cases, let us now look into the second one in detail. click here, incase if your printer showing offline message issue
brother-mfc-j5945dw-not-print-via-network

You cannot print using the Brother printer on a wireless network

To resolve the above-mentioned issue on your Windows computer and start printing again, consider the following steps

Ensure your Brother printer is ready to use

  • Check if your Brother printer is turned ON. If it is not, turn it ON now.
  • Make sure that the printer’s screen is not displaying any errors. In case you see error messages like “Paper jam” or “Ink/Toner Empty,” try to resolve such issues.
  • Next, ensure that your Brother printer is the default one. For this action, move your mouse over the printer icon and wait for the information window to appear on your screen.
  • Cancel all your print jobs.

Check your wireless connection and if necessary, repair it

  • Ensure that your mobile or computer is connected to your wireless network.
  • Check to see whether all the wireless devices are functioning correctly.
  • Make use of the Network Connection Repair Tool. This repair tool locates and updates the printer’s IP address and diagnoses any network issues.
  • Try setting up your Brother printer once more.

Check if you are able to diagnose and resolve other wireless connection issues, if any:

  • The first step is to print the Network Configuration Report.
  • The next step is to check the connection to your wireless router (or access point).
  • If the Wireless Link Status on the Network Configuration Report says Link OK, please check the printer’s and your computer’s IP addresses.
  • In case the Wireless Link Status says Error, you have to reset all your network settings to the factory default.
  • Try to ping your Brother printer.
  • Perform the necessary checks to establish whether your access point or router is functioning correctly.
  • Finally, try setting up the Brother MFC-J5945DW printer again.
  • To resolve the not printing issue on your Mac computer and start printing again, you can utilize the same steps (mentioned above for Windows) with slight changes. If stillBrother MFC-J5945DW Not Print Via Network, Click the call button available on the screen for remote assistance.